How It Works

 

Our lettering is made out of a very thin adhesive backed sheet of vinyl.  
It's good for a one time use.  
But when you are done with your words, they are removable.

 



 Choose your favorite words and see how they look by using our online
design center.  Play with different typefaces, sizes and colors.  Once you're happy with
your words, click order and we'll begin creating your custom lettering.


Within two business weeks, you'll receive your order, which will be
shipped via priority US Mail.



It's so easy to apply your lettering:

 

  1. Make sure the wall surface is clean, smooth and dry.
  2. When you remove the quote from the box, place the quote on a hard surface, and rub the top of the quote, to be sure that the lettering is firmly adhering to the top transfer tape layer.
  3. Place your quote on the wall, tape the edges up with masking tape. Once you are happy with the placement, adhere the top edge of the lettering to the wall with tape creating a hinge.  Lift the lettering up on the hinge  and slowly peel the thicker backing paper underneath away. Your quote should remain on the clear transfer tape. If not, gently press on the backing paper and try again.
  4. Lower the quote back down onto the wall and rub with your hand or burnisher, making sure any air bubbles are pushed out.
  5. Slowly peel off the top sheet of transfer tape.

 


Your quote is ready to enjoy!


Tips:


  • Once the backing paper has been peeled off, DO NOT let the transfer tape touch anything but the final surface.
  • Do not leave your lettering un-applied for more than several months as the adhesive will diminsh.
  • Do not apply the lettering to freshly painted walls.  Allow the wall paint to dry for three to four weeks to be sure the paint is completely dry.
  • This product can be used on walls, mirrors, doors, refrigerators, windows, shelves, cars, lockers, books, etc.
  • Lettering can be stacked in rows, arched, set in straight lines, cut and arranged around doorways, light switches, and more.

 

Removing your lettering:

To remove lettering, warm up the vinyl using a hair dryer on a low setting. Peel back the warmed vinyl being careful not to rip or peel too quickly. Lettering cannot be used again.